Quicksilver Integration?

User avatar
Inkling
Posts: 57
Joined: Tue Jan 23, 2007 8:28 pm
Location: Netherlands
Contact:

Tue Jan 23, 2007 9:58 pm Post

This may not be a core thing, but I absolutely love Quicksilver. I use it with kGTD and OmniOutlinerPro to organise my to do lists and actions and so on, and I would love to use it for something similar e.g. send to scrivener/append to scrivener document.

I know we have services, but I love the idea of a QS plugin so that I can hit my hot key, type out an idea and then send it to scrivener corkboard for processing/further writing later. This way I can do stuff without leaving my current application.

(and I LOVE Scrivener. After nearly a year of putting off my thesis, I finally started getting down to the nitty gritty with it after buying scrivener. Unfortunately I can't afford Mellel and Bookends now :( )

User avatar
KB
Site Admin
Posts: 20836
Joined: Tue Jun 13, 2006 11:23 pm
Platform: Mac
Location: Truro, Cornwall
Contact:

Tue Jan 23, 2007 10:02 pm Post

This would have to be a "future" consideration, I'm afraid. If you mention it again in a few months when everything has settled down and I start thinking about the post-1.0 featureset, then I will have time to consider it properly.
Thanks and all the best,
Keith

User avatar
Inkling
Posts: 57
Joined: Tue Jan 23, 2007 8:28 pm
Location: Netherlands
Contact:

Tue Jan 23, 2007 10:04 pm Post

Absolutely :) I would look into creating a plugin maself, but I'm no coder and this isn't an open source project.

Thanks again for making Scrivener available in the first place! The fullscreen mode is...just...perfect

mp
mpaul
Posts: 16
Joined: Fri Jan 05, 2007 4:24 am
Platform: Mac
Location: Sacramento, California

Tue Jan 23, 2007 11:44 pm Post

You don't need a Quicksilver plug-in to do this. You simply have to install the Services Menu Module. Once you have it installed, invoke Quicksilver, type your text, hit Tab, and then choose one of the Scrivener Services: Append Selection to Current Text Document or Create New Clipping from
Selection. The former will send what you've typed to the end of whatever text document is active in Scrivener; the latter will create a clipping, with the date and time as its title and your text as the text. At your leisure, you can then drag this clipping into your document where you want it, and change the title as you desire.

You can do the same thing with text you've selected in other applications. Just select the text, hit CMD-ESC to put it into Quicksilver, then Tab to the Scrivener service you want to use. Just a couple of keystrokes and it's done.
Cheers,

Mark

ku
kukkurovaca
Posts: 21
Joined: Sun Jun 18, 2006 8:28 pm
Location: Berkeley, CA
Contact:

Wed Jan 24, 2007 2:32 am Post

That's an excellent tip! It's quite depressing how little of quicksilver's functionality I actually use on a regular basis. Maybe this'll prompt me to use it more...
“You can reconstruct the picture from chaos and memory’s ruins.â€

ma
mactheweb
Posts: 4
Joined: Mon Jan 29, 2007 12:35 am
Location: Port Townsend, WA, USA
Contact:

Mon Jan 29, 2007 6:53 am Post

I too love Quicksilver but the Services menu functions that I use frequently I simply create a keyboard shortcut. Go to System Preferences > Keyboard & Mouse > Keyboard Shortcuts. Press the + button to add a new one and give it a unique key combination for the command you typically use, or make one for each option.

This requires memorizing more commands than using Quicksilver but saves a couple of steps.

F4
F451
Posts: 44
Joined: Thu Jan 25, 2007 4:03 am

Mon Jan 29, 2007 7:23 am Post

Menu Master from Unsanity allows you to assign, and reassign, key shortcuts.

User avatar
AmberV
Posts: 24331
Joined: Sun Jun 18, 2006 4:30 am
Platform: Mac + Linux
Location: Ourense, Galiza
Contact:

Mon Jan 29, 2007 11:14 am Post

Also, the free utility Service Scrubber, lets you re-assign short cuts to services easily. As a bonus, you can also clean up that services menu while you are at it. I know I never used mine at all until I found this application because I had a hundred services in there I never used, and it was an unruly tangle; dozens of independent developers with their own ideas of organisation controlling one menu! Argh.
.:.
Ioa Petra'ka
“Whole sight, or all the rest is desolation.” —John Fowles

ka
kastorff
Posts: 53
Joined: Mon Dec 11, 2006 3:11 pm
Location: Kenton, TN USA

Mon Jan 29, 2007 12:17 pm Post

AmberV wrote:Also, the free utility Service Scrubber, lets you re-assign short cuts to services easily. As a bonus, you can also clean up that services menu while you are at it. I know I never used mine at all until I found this application because I had a hundred services in there I never used, and it was an unruly tangle; dozens of independent developers with their own ideas of organisation controlling one menu! Argh.

Agreed...Service Scrubber is a great tool. It's one of those little utilities that does one thing you really didn't know you wanted to do until you did it. ;)
Keith Kastorff

User avatar
Inkling
Posts: 57
Joined: Tue Jan 23, 2007 8:28 pm
Location: Netherlands
Contact:

Thu Feb 08, 2007 11:15 pm Post

I know about the services, but I use Firefox (so they don't work) and I'm addicted to Quicksilver. I do near everything - I append text to text files, I control itunes, I save files, email files, IM people, send files by IM, jot down my GTD tasks.

So, QS is an integrel part of my work flow, especially when browsing etc etc. It couldn't hurt to have QS plugin, and expose the beauty of Scrivener to the QS crowd, many of whom read the popular 43folders and tuaw blog. Any time an App comes out a nifty QS feature the productivity crowd goes NUTS over it.

I'll check out the hot key 'send to scrivener' anyways, obviously. I already have Scrivener opened via a Quicksilver action assigned to a hot key.

User avatar
kewms
Posts: 6593
Joined: Fri Feb 02, 2007 5:22 pm
Platform: Mac

Fri Feb 09, 2007 3:17 am Post

Inkling wrote:I know about the services, but I use Firefox (so they don't work) and I'm addicted to Quicksilver. I do near everything - I append text to text files, I control itunes, I save files, email files, IM people, send files by IM, jot down my GTD tasks.


Get the Services Menu plugin for Quicksilver. It turns all your services into QS actions. It will change your life. :)

Katherine

User avatar
Inkling
Posts: 57
Joined: Tue Jan 23, 2007 8:28 pm
Location: Netherlands
Contact:

Fri Feb 09, 2007 10:02 am Post

I have it ^^ but it really doesn't seem to be working. I never get the clippings or the 'text' showing up in Scrivener. I think I need to experiment a little more.

User avatar
Inkling
Posts: 57
Joined: Tue Jan 23, 2007 8:28 pm
Location: Netherlands
Contact:

Fri Feb 09, 2007 11:50 am Post

Okay, it was working, it was just going to the wrong most recent document :roll: Other than that it worked great.

The only thing is that I don't seem to be able to apply the action directly to the selected text, I have to copy, invoke QS, invoke text mode, paste, then pick the scrivener action.

Anyway to to simply grab the selection straight into QS? There is, but it doesn't work in firefox

*cries*

I have too many tools in firefox to be able to give it up for Camino or Safari :(

User avatar
kewms
Posts: 6593
Joined: Fri Feb 02, 2007 5:22 pm
Platform: Mac

Fri Feb 09, 2007 2:06 pm Post

Inkling wrote:The only thing is that I don't seem to be able to apply the action directly to the selected text, I have to copy, invoke QS, invoke text mode, paste, then pick the scrivener action.

Anyway to to simply grab the selection straight into QS? There is, but it doesn't work in firefox


There doesn't seem to be... this seems to be because Firefox doesn't support services in general.

On the other hand, the copy-QS-text-paste sequence can all be done with the keyboard, so it shouldn't be *that* onerous.

Katherine

User avatar
KB
Site Admin
Posts: 20836
Joined: Tue Jun 13, 2006 11:23 pm
Platform: Mac
Location: Truro, Cornwall
Contact:

Fri Feb 09, 2007 2:11 pm Post

Why use Firefox on a Mac? Camino! Camino! (The Camino people should be paying me. :) )